Archives for February 7, 2019

Introduction to Hardwood Floor Refinishing

You might find in which waxing your floors is enough to get them looking wonderful again; however, you are going to probably have to learn hardwood floor refinishing if you want them to look like they did when you first had them set up. Keep in mind the fact that this is pretty hard work though, therefore a lot of people would rather hire a professional.”

http://www.eriehardwood.com/
When hardwood flooring get dull and listless, they can remove from the value and look of the home that they once added to. In case you are like most people in this troubled economy, you are interested in approaches to cut costs and biting off a huge bill for a floor refinisher is not something that you can really afford at this time. However, you also can’t afford to let the floors weaken. It’s about time to bring them back to life with a DIY hardwood floor refinishing project. Yes, it is possible to refinish your entire hardwood floor yourself however it is recommended that at certain stages you have help.

You need to determine whether the hardwood floor planks make the perfect candidate for the laborious process. You will need to access if the floor has suffered damage from spills, water, or pet urine. To see if the boards are extremely thin to be sanded you can pull up one of the door’s threshold. You’ll have to know should the last sealant was polyurethane, varnish, or wax. You will also have to examine your hardwood floors to determine if they have a dramatic wear patters or deep gouges.

Dull and dilapidated wooden flooring not just looks ugly but it is challenging to clean also. Nevertheless, not all wood flooring calls for total refinishing and just a mop of cloth and water would bring back its sheen. This can be tested by spilling some water on the damaged area; if the water forms small beads, then the polish hasn’t lost its protective coating and just a swipe of wet cloth is enough. However, if water percolates into the floor and turns darker in color, it shows that the polish has lost its protective coating as well as the flooring needs refinishing.

The first step in the hardwood floor refinishing process is sanding away the old finish and stain. In addition to revealing the bare wood, sanding levels the floor helping expose the grain of the planks. Sanding and buffing can get rid of scratches, scuffs, and cracks, and generally boost the appearance of the wood. You or your floor contractor must sand several times, vacuuming between each pass and using smaller-grit sandpaper each and every time.

After the sanding is finished it’s time to apply your stain. If you’re not sure with what type or shade of stain to utilize, you should look at asking the professional who installed your floors. When applying, work with the grain in 5 foot wide sections down the entire width of the room. Once applied it will need roughly 24 hours so that you can dry. It’s not always an easy job, but you’ll see that hardwood floor refinishing can be a very rewarding job and will help you save some money also.